How Can I Setup My Linksys

Before discussing the Linksys RE3000W settings, we will first discuss the N300 extender. By using the N300 to increase the wireless signals of your present modem or router, you can create a strong, dependable Wi-Fi signal in your home for laptops and smartphones. The RE3000W extends the signal from the existing network to eliminate dead zones, boosting WIFI transmissions up to 5,000 square feet. The RE3000W is fully compatible with all modems and routers.

How to set up my Linksys RE3000w WIFI extender?

The Linksys RE3000w WIFI repeater N300 with extender configuration will now be discussed.


  • Your RE3000w should be connected to the outlet. and keep an eye out for the orange power lead that is blinking.
  • Connect a smartphone or computer to the Linksys N300 extension as soon as possible.
  • Once you are connected, open a browser and type into the address bar.
  • You are now on the configuration page for the Linksys RE3000w extender.
  • By clicking “Start,” you may connect your booster to your existing Wi-Fi router or modem. From there, just follow the on-screen directions.

Linksys RE3000w N300 Extender Setup via WPS method

The methods listed below will show you how to install your repeater using the WPS button.

  • Connecting the N300 close to the primary router will begin the Linksys RE3000w configuration.
  • You should now see the RE3000w power led light come on.
  • At this point, press the WPS button on your extension.
  • If the green light on your N300 is blinking, press the WPS button on your router.
  • As soon as the Linksys WIFI RE3000w light goes totally green, keep an eye on it.
  • Finally, connect any wireless device using the N300 repeater. 

If you need help installing your wireless booster, please get in touch with one of our authorised professionals.

Linksys RE3000w WIFI Extender Firmware Update

  • You need to turn on your Linksys N300 RE3000w range extender.
  • Include your computer in the network of the RE3000w extender.
  • After that, open your computer’s web browser.
  • You are now on the login screen for Linksys RE3000w settings. Please enter
  • Log in to your device after entering the username and password.
  • After pressing the Firmware Upgrade button, you must choose the “Choose File” option.
  • The firmware file you downloaded should be selected.
  • Tap it to select “Start Upgrade.”
  • Wait until the Linksys N300 has completed the upgrade.
RE3000 Setup


It is always important to reset the extension since, as we previously stated, some issues can never be fixed by any other techniques. As a result, Sir, you must perform the Linksys re3000w reset procedure. Therefore, let’s get going.

  • Ensure that your extender is connected to a power source and switched on.
  • Either the extender’s rear or bottom contain the reset button.
  • According to how the extender’s LED behaves, press it.

The reset process for the Linksys re3000w configuration will now be complete. You must restart and set up the extender after you’re done.

NOTE:- Have any of the troubleshooting methods suggested above been unsuccessful in resolving your issues? Rest assured. Contact us if you run into any setup problems with the Linksys RE3000w extender.