How Can I Setup My Linksys

Following the purchase of a new Linksys RE7000 extender setup tool. To get it working quickly and effectively, you must first complete the setup process. There are two alternative configurations for this gadget. Either access point mode or range extender mode can be used to do this.


In case you want assistance setting a Linksys RE7000 router, please see the section below. In this part, we’ll provide you with a few simple configuration instructions so you can set up the Linksys RE7000 device on your own to function as a range extender.

RE7000 Linksys extender Simple setup instructions

Setting up a Linksys RE7000 extender is pretty simple. This may be accomplished by following the steps described below..


Note:- Verify that your internet connection is active and functioning normally before continuing with the next set of steps. The Wi-Fi configurations of the router, including the SSID (Wi-Fi name) and security key, must also be understood by you (Password).

Step 1:-


  • Connect the Linksys router to a power source before turning it on. The LED indication should turn orange after a little while.


Step 2:-


  • Connect the device to the chosen SSID of the Linksys RE7000 using simply a computer or a smartphone. The device has selected LinkSys Extender Setup-xxxx as its Wi-Fi name. Wi-Fi must be turned on before starting the setup procedure.


Step 3:-


  • Open the selected browser on your PC. To access the settings page, enter “” in the address box and press the enter key on your keyboard. The Linksys RE7000’s default IP address is “”.


Step 4:-


  • When the setup screen displays, click the “start setup” button. Immediately create an admin password. In the “password” area, type your chosen password. To confirm it, enter the password once again in the “Enter admin password again” box.

WPS Setup for Linksys RE7000 Extender

WPS is the quickest and simplest method for configuring a Linksys RE7000. The consumer doesn’t have to spend a lot of time on this. You may complete the RE7000 WPS Setup by following the steps below.

How to set up Linksys RE7000 with WPS


  • First, open the extender’s box.
  • Connect a power source to it.
  • A home router and the RE7000 ought to be put in the same room.
  • Keep an eye out for the orange light to turn green after two minutes.
  • Your AC1900’s WPS button should be pressed.
  • After a minute, click the WPS button on the primary router.
  • Hold off until the WPS LED is fully lit in green.
  • Now that your extension’s setting is complete, you may transfer it to the place of your choosing.
  • If the WPS button is not immediately visible on your home router, you may log in to the web interface and search for it there.

Manual Setup for Linksys RE7000 Extender

Do the aforementioned Linksys RE7000 setup instructions not work? Not to worry! Consider the tips provided below while configuring your Linksys RE7000 AC1900 WiFi range extender.

  • Open the Linksys AC1900 RE7000 extender with caution.
  • Place the WiFi range extender next to your home’s wireless router. Make sure there is a distance of no more than 1-3 feet between the two devices while setting up the Linksys range extender.
  • Connect your Linksys extender to the router using an Ethernet wire.
  • Finally, plug your Linksys RE7000 into an outlet to turn it on.
  • To start up, give the Linksys extender some time. On the power LED, orange is changed to green.
  • Next, switch on your home WiFi router and computer.
  • Open your preferred web browser.
  • For extenders, go to the Linksys setup page.
  • As a consequence, you finally arrive at the Linksys RE7000 setup login screen.
  • Enter the WiFi extender’s default login details.
  • The “Login” or “Sign In” button must be clicked.
  • The web browser directs you to the Linksys RE7000 admin panel interface.
  • Follow the on-screen directions to set up your Linksys AC1900 extender as necessary.
  • After completing each step, press the “Save” button.
  • Detach the WiFi extension from the wall to move it.
  • After being replugged into an outlet, it has to be switched on.
  • Your laptop or PC should try to connect to the WiFi extension.
  • Visit any website and use Google to check for Internet connectivity.

How can my Linksys RE7000 firmware be updated?

Your extender needs firmware, a combination of hardware and software, to function properly. You’ll receive alerts for firmware updates periodically, enabling you to acquire the most recent security features and bug fixes.


Follow these procedures to upgrade the firmware on a Linksys RE7000:

  • Purchase a smartphone, laptop, or other smart gadget.
  • After opening it, type into your preferred web browser.
  • Set up your Linksys extender by logging in.
  • Select the option for firmware upgrading.
  • Then choose CHECK FOR FIRMWARE.
  • Now select UPDATE from the menu.
firmware update

Note:- The firmware upgrade file is only available for download through, which is Linksys’ official website.

The Linksys RE7000 reset procedure.

You’ve come to the correct spot if your Linksys RE700 wifi range extender has to be reset due to certain technical difficulties. We’ll show you how to reset your Linksys RE7000 wifi range extender in this article.


The Linksys RE7000 may be reset by carrying out the following actions:


  • The reset button on your Linksys RE700 AC1900 should be visible.
  • It could be accessible from the booster’s bottom or rear.
  • Push it in and hold it for 10 seconds when you’ve found it.
  • You need to reboot the device one more time to complete the reset procedure.

Note:- If you have any setup problems with your Linksys RE7000 extender, please contact us via live chat or New Extender setup.